Transpower Electrical Equipment Co., Ltd. is one of the most reliable manufacturers and suppliers of battery energy storage transformer in China. Welcome to buy high quality customized products at competitive price from our factory. Contact us for quotation.
Product Overview
Battery Energy Storage Transformers are specialized power transformers designed specifically for Battery Energy Storage Systems (BESS). They deliver reliable step-up and step-down voltage conversion between Power Conversion Systems (PCS) and medium-voltage utility grid networks. Engineered for high-frequency bidirectionality, our transformers support seamless charge and discharge cycles while maintaining grid stability and power quality.
Unlike conventional distribution transformers, BESS transformers operate under demanding conditions characterized by high total harmonic distortion (THD), frequent peak loads, pulse-width modulation (PWM) switching stress, and daily load cycling. To counter these challenges, our units feature optimized magnetic circuit designs, reinforced winding structures, specialized winding shielding, and advanced thermal management systems to minimize hot-spot temperatures and ensure long-term durability.
Backed by extensive manufacturing experience across utility-scale energy storage, solar-plus-storage, and industrial microgrids, we provide fully customized transformer solutions tailored to your specific PCS topology, grid compliance codes, voltage classes, and site ambient conditions.
Key Features & Technical Advantages
Engineered for Inverter-Based BESS Operations Equipped with high-frequency harmonic attenuation and electrostatic shielding between primary and secondary windings to mitigate PWM high-frequency switching transients and reduce eddy current losses caused by harmonics.
Heavy-Duty Design for Frequent Charge/Discharge Cycles Reinforced mechanical clamping systems, stabilized axial pressing, and high-density pressboard insulation protect windings against dynamic mechanical stresses resulting from frequent current reversals and rapid thermal expansion.
Ultra-Low Loss & High Energy Efficiency Utilizing high-permeability, domain-refined Cold-Rolled Grain-Oriented (CRGO) silicon steel assembled with precision step-lap miter joint technology, our designs drastically cut no-load losses and total cost of ownership (TCO).
Advanced Thermal Optimization & Extended Lifespan Thermodynamically analyzed oil ducting and winding cooling channels reduce hot-spot temperatures. Coupled with thermally upgraded kraft paper, our transformers deliver a projected service life of 25–30 years even under high-load cycling profiles.
Customized Environmental Protection Enclosures Built to withstand extreme environments worldwide, including:
• Corrosive & High-Humidity: Up to C5/CX marine-grade paint protection systems for coastal and offshore projects.
• Desert & High-Temperature: Optimized cooling capacity for ambient temperatures up to +55°C.
• High-Altitude: Enhanced dielectric insulation clearances for installations above 2,000 meters.
• Containerized BESS: Compact footprint designs engineered for direct integration into standard 20ft/40ft BESS containers.
Technical Specifications
|
Parameter |
Standard / Customizable Specification |
|
Rated Capacity |
100 kVA up to 20 MVA (customized on request) |
|
Primary / High Voltage |
Up to 40.5 kV (11kV, 22kV, 33kV, 34.5kV, etc.) |
|
Secondary / Low Voltage |
Customized matching multi-winding PCS (0.69kV, 0.8kV, 0.9kV, 1.1kV) |
|
Frequency |
50 Hz / 60 Hz |
|
Cooling Method |
ONAN, ONAF, KNAN (Ester oil / Bio-degradable fluid option) |
|
Applicable Standards |
IEC 60076, IEEE C57.12, UL, CE, CSA, EN |
|
Vector Group |
Dyn11, Dyn1, Yyn0, Dyn5, or multi-split windings (e.g., Dyn11yn11) |
|
Short-Circuit Impedance |
Customized per project short-circuit and harmonic studies (typically 6% – 10%) |
|
Core Material |
High-permeability, low-loss CRGO Silicon Steel |
|
Winding Material |
High-conductivity Electrolytic Copper or Aluminum |
|
Enclosure / IP Rating |
Indoor (IP20/IP23) / Outdoor (IP55/IP65/NEMA 3R/4X) |
|
Design Life |
25–30 Years |
Quality Assurance, Testing & Compliance
Every transformer undergoes rigorous quality inspection at our ISO 9001 / ISO 14001 / ISO 45001 certified manufacturing facility.
Routine & Type Testing (IEC 60076 / IEEE C57):
• Winding resistance measurement & Voltage ratio/Phase displacement verification
• Insulation resistance, Tan Delta, and Dissipation Factor testing
• Short-circuit impedance and load loss / No-load loss and current measurement
• Applied AC voltage test & Induced overvoltage withstand test
• Partial Discharge (PD) testing for high-voltage integrity
• Optional Type Tests: Temperature rise test, Lightning Impulse (BIL) test, and Short-circuit withstand capability verification.
Applications & Global Project Track Record
Our BESS Transformers are field-proven across demanding energy storage applications globally:
Utility-Scale Energy Storage (Front-of-the-meter grid support)
Solar-plus-Storage & Wind-plus-Storage Power Plants
Microgrids & Remote Off-Grid Power Systems
Commercial & Industrial (C&I) Peak Shaving & Load Shifting
EV Ultra-Fast Charging Hubs with Integrated BESS
Grid Ancillary Services (Frequency Regulation & Spinning Reserve)
Why Global EPCs, System Integrators & Developers Partner With Us
Deep Application Engineering Support: Custom electrical modeling, short-circuit calculations, and harmonic compatibility analysis before production.
Rapid Drawing Turnaround: Preliminary 2D/3D CAD models, General Arrangement (GA) drawings, and electrical diagrams provided within 48 hours.
Seamless PCS Integration: Compatible with major global power conversion system (PCS) brands.
Global Logistics & Export Standards: Heavy-duty seaworthy packaging, nitrogen-filled tank shipping option (if required), and full customs documentation support.
FAQ
Hot Tags: battery energy storage transformer, China battery energy storage transformer manufacturers, suppliers, factory


